1/48 Lancaster B Mk. I
Click on the thumbnail to go to a full size image.
is the original design. The poles were out of position and the
navigator's seat blocked part of the engineer's panel. Since this
model is being built
without crew the seat should be forward, up against the table so entering crew can get by. The seat had an articulated mount that allowed movement.
The instrument panel was a little too far forward, so thet the two pe gauges fouled the cockpit coaming. The yoke was too far from the pilot's
seat, and too close to the instrument panel, not allowing room for forward motion. The poles were too far from the table and should be up against it.
Tamiya Lancaster Index Page Lancaster Main Index Page My Models Index Page John Eaton Home Page