Tamiya 1/48 Lancaster B Mk. I
Click on the thumbnail to go to a full size image.

With the landing gear installed, a test fit showed that  the rear gear bulkhead interfered with the aft end of the nacelle, not allowing the nacelle to rest far enough 
forward or to be close enough to the wing at the aft end.  The gear bulkhead was sanded down a bit and the alignment dogs on the inside of the aft end of the 
nacelle were removed.  This allowed the nacelle to fit properly.  The same correction was needed on both wings.

  Tamiya Lancaster Index Page            Lancaster Main Index Page           My Models Index Page           John Eaton Home Page