Airfix 1/72 C-47A

The interior parts were not glued on to a side of the fuselage until the fuselage halves had been glued together, that way it floats into the center.  It will be sufficient to
only glue the aft end anyway and that is easy to do because of the open area that later will be covered by the wing lower center section.  Some sanding had to be done
on the fuselage bulkheads shown here to get the fuselage to close up.  It wasn't much but it took several trial fits to sort out where things needed to be sanded.

C-47 Index Page              C-47 Index Page            My Models Index Page           John Eaton Home Page