The Bell P-63
Click on the thumbnail for
a full screen image
MPM 1/48 P-63A
can be a little bit of a pain to build, due to poor fit and low
pressure injection molding, but the surface detail is niceand
seems accurate to me. Beware of getting the
glued together straight, the resin cockpit floor needs a little
reshaping or the nose will
try to go off to one side.
instrument panel and vacform canopy also need very careful fitting.
The Propagteam decals need to be replaced,
with an overcoating of liquid decal film the serial numbers and stars
were extremely frail and didn't want to move once they hit the model.
My Models Index
_________ John Eaton Home